Computer-controlled multitester load frames

Din păcate acest articol este disponibil doar în Engleză Britanică. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.

Electromechanical multitest load frame, 100 kN capacity

With the following equipment:
• 100 kN test frame, distance between columns 420 mm
• 100 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Official ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 290
Columns (2) diameter (mm) 50
Distance between plates (mm) 610
Distance between columns (mm) 420
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 1850
Width (mm) 860
Depth (mm) 520
Weight 300

Electromechanical multitest load frame, 200 kN capacity

With the following equipment:
• 200 kN test frame, distance between columns 420 mm
• 200 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Offi cial ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 360
Columns (2) diameter (mm) 70
Distance between plates (mm) 900
Distance between columns (mm) 620
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 2250
Width (mm) 1000
Depth (mm) 520
Weight 350

Electromechanical multitest load frame, 200 kN capacity

With the following equipment:
• 200 kN test frame, distance between columns 620 mm
• 200 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Official ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 360
Columns (2) diameter (mm) 70
Distance between plates (mm) 900
Distance between columns (mm) 620
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 2250
Width (mm) 1200
Depth (mm) 550
Weight 380

Electromechanical multitest load frame, 300 kN capacity

With the following equipment:
• 300 kN test frame, distance between columns 420 mm
• 300 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Offi cial ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 360
Columns (2) diameter (mm) 70
Distance between plates (mm) 900
Distance between columns (mm) 620
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 2250
Width (mm) 1000
Depth (mm) 520
Weight 350

Electromechanical multitest load frame, 300 kN capacity

With the following equipment:
• 300 kN test frame, distance between columns 620 mm
• 300 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Official ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 360
Columns (2) diameter (mm) 70
Distance between plates (mm) 900
Distance between columns (mm) 620
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 2250
Width (mm) 1200
Depth (mm) 550
Weight 380

Electromechanical multitest load frame, 50 kN capacity

With the following equipment:
• 50 kN test frame, distance between columns 420 mm
• 50 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Official ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 290
Columns (2) diameter (mm) 50
Distance between plates (mm) 610
Distance between columns (mm) 420
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 1850
Width (mm) 860
Depth (mm) 520
Weight 300