Thru Coating Thickness Gauge SUT-300 Series

Features

  • Be Capable of reading wall thickness thru coatings and paint without affecting the measurement.
  • Auto probe zero calibration, Auto Probe identify.
  • Measuring range: Thru coating mode: 4-25mm
  • Standard mode:0.65-400mm
  • Display resolution: 0.01mm or 0.001 inch
  • 5 MHz,7.5MHz, 10MHz, 2.5MHz transducers are available.
  • Accuracy:±(0.1% thickness + 0.04)mm
  • USB output, memory 5000 readings with location number

Specification

Model SUT-300 SUT-302
Measurement mode T-E -Standard measurement: For Normal thickness measurement.
-Minimum measurement: For curved surface
-Differential measurement: Displays the difference from the actual thickness measurement or from a user entered reference value
-Average measurement : 2-9 point selectable
-Limit measurement: Min. Max setting and alarm
E-E The metal wall thickness is accurately and quickly measured in spite of surface coating
Scan thickness value at 10 measurements per second while also display actual thickness (Ideal for high temp. thickness readings)
Probe identify Auto
Probe zero Auto
Gain adjust Auto ;Manual :low, standard and high 
Memory / 5000 groups
Output / USB to PC
Measuring Range E-E : 3-25mm
T-E: 0.65-400mm(range depends on probe-material combination)
Resolution 0.01mm / 0.001 inch
Information Display Measurement reading, Probe type, Velocity, measurement mode, measurement Symbol, Battery
Velocity range 9 material velocities are stored for selection, or entre the new velocity manually (1000m/s-9999m/s)
Vel. measurement Simply calibrate when a material’s velocity is unknown
Display 128 x 64 graphics LCD monochrome
Battery Type 2 AAA Alkaline
Battery life Up to 50 Hours (without Backlight)
Shut off Auto, 2Min., 5Min., or never shut off delectable
Work.Temperature -20°C-50°C
Dimensions 115mm x 64mm x 27mm
Weight 220g