Din păcate acest articol este disponibil doar în Engleză Britanică. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.
Features
Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.
Transducer models are available for special application, including for coarse grain material and high temperature applications.
Two-Point Calibration function.
Two work modes: Single point mode and Scan mode.
Coupling status indicator showing the coupling status.
Option software to process the memory data on the PC.
Option mini-printer to print the measured data by RS232 port.
Specification
Display: |
4.5 digits LCD with EL backlight. |
Measuring Range: |
0.75~300mm (in Steel). |
Sound Velocity Range: |
1000~9999 m/s. |
Resolution |
0.1/0.01mm |
Accuracy: |
±(0.5%Thickness+0.04)mm, depends on materials and conditions |
Units: |
Metric/Imperial unit selectable. |
measuring circle: |
Four measurements readings per second for single point measurement, and ten per second for Scan Mode. |
Memory |
Memory for up to 20 files (up to 99 values for each file) of stored values. |
Power Source: |
Two “AA” size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off). |
Communication: |
RS232 serial port. |
Outline dimensions: |
150×74×32 mm. |
Weight: |
245g |
Packing list
|
No |
Item |
Quantity |
Note |
Standard Configuration |
1 |
Main body |
1 |
|
2 |
Transducer |
1 |
|
3 |
Couplant Bottle |
1 |
|
4 |
Instrument Case |
1 |
|
5 |
Alkaline battery |
2 |
AA size |
6 |
Operating Manual |
1 |
|
7 |
Warranty Card |
1 |
|
Optional Configuration |
9 |
Transducer: N02 |
|
|
10 |
Transducer: N07 |
|
11 |
Transducer: HT5 |
|
12 |
Mini printer |
1 |
|
13 |
Printer cable |
1 |
|
14 |
software for Thickness Gauge |
1 |
using on the PC |
15 |
Communication Cable |
1 |
|