Computer-controlled multitester load frames

Electromechanical multitest load frame, 100 kN capacity

With the following equipment:
• 100 kN test frame, distance between columns 420 mm
• 100 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Official ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 290
Columns (2) diameter (mm) 50
Distance between plates (mm) 610
Distance between columns (mm) 420
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 1850
Width (mm) 860
Depth (mm) 520
Weight 300

Electromechanical multitest load frame, 200 kN capacity

With the following equipment:
• 200 kN test frame, distance between columns 420 mm
• 200 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Offi cial ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 360
Columns (2) diameter (mm) 70
Distance between plates (mm) 900
Distance between columns (mm) 620
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 2250
Width (mm) 1000
Depth (mm) 520
Weight 350

Electromechanical multitest load frame, 200 kN capacity

With the following equipment:
• 200 kN test frame, distance between columns 620 mm
• 200 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Official ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 360
Columns (2) diameter (mm) 70
Distance between plates (mm) 900
Distance between columns (mm) 620
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 2250
Width (mm) 1200
Depth (mm) 550
Weight 380

Electromechanical multitest load frame, 300 kN capacity

With the following equipment:
• 300 kN test frame, distance between columns 420 mm
• 300 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Offi cial ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 360
Columns (2) diameter (mm) 70
Distance between plates (mm) 900
Distance between columns (mm) 620
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 2250
Width (mm) 1000
Depth (mm) 520
Weight 350

Electromechanical multitest load frame, 300 kN capacity

With the following equipment:
• 300 kN test frame, distance between columns 620 mm
• 300 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Official ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 360
Columns (2) diameter (mm) 70
Distance between plates (mm) 900
Distance between columns (mm) 620
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 2250
Width (mm) 1200
Depth (mm) 550
Weight 380

Electromechanical multitest load frame, 50 kN capacity

With the following equipment:
• 50 kN test frame, distance between columns 420 mm
• 50 kN load cell
• Digital computer control and adjustment of speed, force and displacement.
• Complete PC and printer.
• ETIWIN software
• Compression plates.
• Official ENAC calibration certificate.
• Instruction manual.
Controlled speeds (mm/min) 0.1 – 200
Shaft stroke (mm) 290
Columns (2) diameter (mm) 50
Distance between plates (mm) 610
Distance between columns (mm) 420
Overload capacity 150%
Force transducer mod. DSCK
Linearity 0.10%
Force precision better than 0.5% of the reading
Stroke transducer incremental encoder
Resolution 0.01 mm throughout the stroke
Power supply 3 x 380 V 50 /60 Hz (others on request)
Consumption 600 VA (three phase-rack)
Height (mm) 1850
Width (mm) 860
Depth (mm) 520
Weight 300