Marshall test presses

Force transducers

V0028 50 kN force transducer. Class: 0.5
V0029 20 kN force transducer. Class: 0.5
V0029/1 10 kN force transducer. Class: 0,5
V0029/2 5 kN force transducer. Class: 0.5
V0029/3 50 kN submersible force transducer.

Linear displacement transducers

S0238 Linear displacement transducer, 25 mm
Mechanical attachment.
Stroke: 25 mm
Independent linearity up to 0.05%.
Infinite resolution.
Electrical connections: 1.50 m of 3-pole shielded wire.

S0239 Linear displacement transducer, 50 mm
Mechanical attachment.
Stroke: 50 mm
Independent linearity up to 0.05%.
Infinite resolution.
Electrical connections: 1.50 m of 3-pole shielded wire.

S0239/1 Stand for the linear displacement transducer.

Marshall motor-driven press with a capacity of 50 kN

Marshall motor-driven press with a capacity of 50 kN, consisting of two sturdy support columns joined by an adjustable crosshead equipped with a ball joint. The load is applied by a mechanical spindle driven by a gearbox at constant speed and double end-stop. Complete with a control panel, main switch and ramp up / ramp down inverter.
Power supply: 220 V 50 Hz
Test speed: 50.8 mm/min
Horizontal spacing: 290 mm
Vertical spacing: 320 mm
Piston stroke: 65 mm
Dimensions: 470 x 440 x 1300 mm
Weight: 90 kg

Digital display

CBR, Marshall and CBR / Marshall presses can be equipped with dynamometric rings and dial gauges. They can also be provided with load transducers and deformation meters, in which case the readings are displayed on digital indicators
H0206 Plus and H0206/1.
H0206/1 Digital display
General Characteristics
14-bit Microprocessor board
Backlit alphanumeric LCD display with 9 mm characters.
Two data channels to connect to load, pressure or displacement transducers.
RS232C port to connect to printer or computer.
Saves data in Excel format. (*.xsl)
Measurement units available: N; daN; KN; Kgf; Nm; g; Kg; bar; mbar; Mpa; atm; V; mV; mV/V; mm; µm.
Auto tare key (zero)
Peak activation key.
Key for uploading data to a PC or printer.
PROETI software to save test data and upload them to a PC for printing or storage.
Power supply: 220 V 50/60 Hz
Dimensions: 200 x 80 x 130 mm
Weight: 1 Kg

Dynamometric ring, 50 kN.

Supplied complete with dial gauge, 10 x 0.01 mm
CBR, Marshall and CBR / Marshall presses can be equipped with dynamometric rings and dial gauges. They can also be provided with load transducers and deformation meters, in which case the readings are displayed on digital indicators
H0206 Plus and H0206/1.
H0206/PLUS Digital Force Display Module with Microprocessor UDI 16/4 PLUS
16-bit microprocessor board
Back-lit LCD display with 240 x 128 pixel.
Four programmable data collection channels for connection to force, pressure or displacement transducers.
Two RS232C outputs for connection to a printer or PC.
Saves data in Excel format. (*.xsl)
Measurement units available: N; daN; KN; Kgf; Nm; g; Kg; bar; mbar; Mpa; atm; V; mV; mV/V; mm; µm.
Menu available in 4 languages (Spanish, English, Portuguese and Italian).
PROETI UDI16/4PLUS software for data/curve collection in real time.
Choice of the specimen area to test.
Selection of degree of load (N/s; Mpa/s; kg/cm2*s) and tolerance ± % of value entered
Display of measurement channels selected by the user.
Automatic calculation of Maximum Load (Fm), Unit Load (Rm) and Mean Value.
Storage of data in Excel format.
Allows recorded data to be uploaded to a PC in
Excel format. (.xls)

Power supply: 220 V 50/60 Hz
Dimensions: 230 x 145 x 180 mm
Weight: 2 kg