Rock permeability with Hoek cells

Din păcate acest articol este disponibil doar în Engleză Britanică. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.

To measure permeability or water flow with a rock sample inserted in a Hoek cell with a controlled system of pressurised water.
The test is performed with the Hoek cells used in the triaxial compression test adapted to the corresponding head. These heads

Models:
A0691/5 Samples measuring Ø 30.10 mm.
A0692/5 Samples measuring Ø 54.74 mm.
A0693/5 Samples measuring Ø 42.04 mm.
A0694/5 Samples measuring Ø 38.10 mm.

A0710 Permeability device mounted on a tripod, connected to the cell head. 50 ml burette with 0.1 ml divisions.

Accessories:
A0710/1 Nylon tube (25 m).
A0708 Constant oil/water pressure system permeability tests. Used to force water flow through the Hoek cell. The hydraulic pressure can be adjusted between 0 and 3500 kPa using the valve located on the control panel. The system is equipped with a motor-driven hydraulic pump and a tap to connect to the upper head of the cell. Supplied complete with a pressure gauge with a scale from 0 – 3500 kPa.
Power supply: Single phase 220/240 V. 50 Hz.
Dimensions: 310 x 300 x 400 mm.
Weight: 20 kg approx.